KILL THE BUZZ. RIDE SMOOTH.

Handlebar vibration sucks. It leads to numb hands, wrist pain, and arm fatigue. Barsnake is a high-tech polymer insert that absorbs vibration before it ever reaches your hands.

♦️ Made in the USA & trusted by riders for decades.
♦️ Fits motorcycles, dirt bikes, ATVs & more.
♦️ Kills vibration, not your grip.
♦️ Engineered for control & comfort.
♦️ Cuts down on hand & wrist fatigue.

Easy to install. Easy to ride. Below are the three Barsnake models built to fit your ride:

Collection: Highway & Street Series

WHAT THE PROS SAY

DirtRider.com

"After having a low profile for a while, Barsnake is back - and it’s a best buy for most riders, simply priceless for those who suffer from excessive vibration. What is a Barsnake? It’s a dense rubber rod designed to fit aluminum or steel handlebars. Simply slide it through the bar, and it absorbs and dampens the tingly vibration that reaches your hands. Barsnake is a great product that has adapted to the times and trends in handlebar fashion. After all, bars may come and go, but vibration is never welcome!"

 Rider Magazine

"Vibration isn't usually a serious problem among today's bikes, but the high frequency, hand-numbing variety appears occasionally and can be annoying.

To install the Barsnake, first you remove the handlebar grips. The Barsnake can only be installed in tubular handlebars, and only if there are no control cables or wires running through the bars. Next you grease one end of the handlebar, and lubricate the Barsnake with grease. Thread the installation wire through the greased handlebar end and out to the other side. Then thread the remainder of the wire through the hole in the end of the Barsnake, twisting at least four inches of the wire back on itself a half dozen times. Then attach the other end of the wire to a stick and pull the Barsnake through the last few inches with another piece of wire.

Perhaps the best test is taking the bike for a ride. The American made Barsnake comes in three sizes for aluminum motorcross bars, standard bars or one inch (Harley-Davidson and others)."

City Bike Magazine

"Installing the Barsnake is a kind of fun job. It is not like other mechanical tasks one does around motorcycles. The tube fits tightly into the bar. You grease it heavily and spray the inside of the bar with silicone or some kind of lube.

Does it work? I rode about 60 miles today with the Barsnake installed at freeway speeds, between 4000 and 5500 rpm. My bars felt steadier, less buzzy. The bars on my Kawasaki are short and rigidly mounted. Longer bars would vibrate more and would house more of the Barsnake. One might feel a more dramatic difference and each bike would no doubt be different. And the images in my bar mounted mirrors are suddenly more clear. Barsnake works!"

Motocross Action Magazine

"Get rid of the rattle and hum and then take a bite out of the competition with the Barsnake - designed to deaden excessive handlebar vibrations caused by high-speed, rough terrain riding."

Motorcycle Products

"Barsnake is a classic example of American innovation! It is a simple, effective solution to a universal problem, Handlebar Viberation. The Barsnake has the largest potential customer base of any motorcycle product ever offered. Virtually every motorcycle made in the last 50 years would benefit from the installation of Barsnake. Truly universal, it fits nearly every make, model and year of motorcycle. The Barsnake creates and fills its own market place without competition."